SN95 Broken Door Handle inserts (Door Cups) Broken tabs (clips)


If yours is broken I have a repair (see bellow).

But if you haven't broken it yet, let's first talk about how to remove the handle from the doors on the 1994 - 2004 Mustangs. (BE VERY GENTLE)

1. Press down gently with a flathead or trim removal tool (at the top, you will see a bit of a groove).
2. Pull the upper tab outward from the door a bit so it's free of the hole.
3. Slide the whole piece forward and up.
4. Disconnect wires if any.

(I did make a video with the removal in it, but it is a longer video of the whole interior panel/door card. So It doesn't seem as relevant).

Now I know someone needed this because EVERY SINGLE one at the junkyards has been broken. But rather than replace the entire thing. I did make a work around so you can re-use the broken ones and save some money.

FixingWithFriends's Thingiverse Profile

This is free to download, all you need is access to a 3D printer, some adhesive (I used a combination of super glue and high strength hot glue), and your imagination. You may have to remove some additional material from the original parts. Once printed they only take a couple of minutes to install. I will make a video eventually but I trust you all can figure it out.

Hopefully some of you will find it useful.